In keeping with our commitment to manufacture low water usage equipment, the HE-2TT fully automatic water softener is designed to use 30% less salt or potassium than a conventional softener, and 40% less water as well.
24V low voltage power.
Metered design to only regenerate as needed.
Adjustable regeneration times.
Adjustable cycle length
Works with flow rates up to 1.25-inch pipe
STANDARD EQUIPMENT
Electronic Meter
Full flow plastic by-pass valve
Stainless steel jacket for HE-2TT
Energy saving 24 volt power
High capacity softening resin
By-pass valve for up to 1-inch piping
Stainless Steel Jacket
18″ X 40″ Salt Cabinet
5000 VALVE FEATURES
Valve Material
Noryl
Inlet/Outlet
3/4 to 1.25 inches
Cycles
5
Max. Backwash
17 gpm
Downflow/ Upflow Regeneration
Adjustable Cycle Length
Yes
Time Available per Cycle
99 min.
Meter Capacity (gal)
1-9999
Drain Line
1/2-inch MPT
Brine Line
3/8 inch
Injector Brine System
Weight
9 lbs.
Pressure Hydrostatic
300 psi
Temperature
34-110 F
Working Pressure
20-110 psi
WQA Gold Seal System 0.5-3.0 cu. ft.
HE-1 SPECIFICATIONS
Cu Ft. high capacity resin
0.85
Minimum salt per regeneration (lbs)
3
Mineral tank size (in)
8 x 35
Max flow rate (gpm)
9
Gallons used per regeneration
15
Maximum water hardness (GPG)
35
Maximum iron (mg/l)
4
Maximum flow to drain (GPM)
1.5
Note: Ferrous (clear) iron removal only. No ferric, organic or bacterial iron.
Spanish 
English