Softener 5000

Products / Water Softeners
Posted by paceno11 on 03, July 2011

In keeping with our commitment to manufacture low water usage equipment, the HE-2TT fully automatic water softener Is designed to use 30% less salt or potassium than a conventional softener, and 40% less water as well.

  • 24V low voltage power.
  • Metered design to only regenerate as needed.
  • Adjustable regeneration times.
  • Adjustable cycle length
  • Works with flow rates up to 1.25? pipe

STANDARD EQUIPMENT

  • Electronic Meter
  • Full flow plastic by-pass valve
  • Stainless steel jacket for HE-2TT
  • Energy saving 24 volt power
  • Hi capacity softening resin
  • By-pass valve for up to 1? piping
  • Stainless Steel Jacket
  • 18″ X 40″ Salt Cabinet

 

5000 VALVE FEATURES HE-1 SPECIFICATIONS
Valve Material Noryl Cu Ft. high capacity resin 0.85
Inlet/Outlet 3/4? to 1.25? Minimum salt per regeneration (lbs) 3
Cycles 5 Mineral tank size (in) 8 x 35
Max. Backwash 17 gpm Max flow rate (gpm) 9
Downflow/ Uplfow Regeneration Gallons used per regeneration 15
Adjustable Cycle Length Yes Maximum water hardness (GPG) 35
Time Available per Cycle 99 min. Maximum iron (mg/l) 4
Meter Capacity (gal) 1-9999 Maximum flow to drain (GPM) 1.5
Drain Line 1/2? MPT
Brine Line 3/8? Note: Ferrous (clear) iron removal onlyNo ferric, organic or bacterial iron.
Injector Brine System
Weight 9 lbs.
Pressure Hydrostatic 300 psi
Temperature 34-110 F
Working Pressure 20-110 psi
WQA Gold Seal System 0.5-3.0 cu. ft.